Fg 01 manual

SAFER: Reduce liability by recording information with accuracy ensuring a healthy pull and peace of mind for the contractor. EASIER: Wirelessly monitor force, speed and distance through the entire pull. The G-Series Smart Pull Eliminates. Diminished transmission capabilities. Rework and liability for the contractor. Potential fire hazards. 1. Switch on the FG and connect it to your oscilloscope, Main output (3) to CH1. 2. Connect the SWEEP output (4) BNC to CH2. 3. Set the RANGE (5) of FG at K position. 4. Set the FREQUENCY (6) of FG at position. 5. Set the FUNCTION (7) of FG at sine wave. 6. Turn the SWEEP RATE (8) knob, the display of CH1 will remain unchanged. Describe your experience with the Youkits FG graphic antenna analyzer and tell us why you give it the rating you did (required). Other useful information would include your experience with similar products, infomation on a product that you would .

1. Switch on the FG and connect it to your oscilloscope, Main output (3) to CH1. 2. Connect the SWEEP output (4) BNC to CH2. 3. Set the RANGE (5) of FG at K position. 4. Set the FREQUENCY (6) of FG at position. 5. Set the FUNCTION (7) of FG at sine wave. 6. Turn the SWEEP RATE (8) knob, the display of CH1 will remain unchanged. FG-NET_Operation Installation Manual_EN_v_docx CHAPTER I: FG-NET DIGITAL UNIT INSTALLATION 1. MOUNTING THE FG-NET DIGITAL UNIT: E AND F The FG-NET E Digital Unit is available in a rack mounted version (in a bay or a 19' casing). It is advised to choose a location at eye-height level in order to facilitate reading the display. Introduction to the ANB The ANB is an FTTH GPON ONU. It provides users with communication and entertainment services in the form of data, voice, video, and so on, to meet the integrated access demand of families and small-scaled enterprises. Appearance The overall appearance of the ANB is shown in Figure

FG Mhz Antenna ANALYSER. Assembed unit, tested and ready to use, Portable design easy to carry and operating, Comes with battery pack, 10 MEM, Bigger screen size cm x cm, Color display with detail information, Center freq step:1K,10K,K,1Mhz, Scan widthKMhz in 12 step, Size: H cm x W cm x D cm. SAFER: Reduce liability by recording information with accuracy ensuring a healthy pull and peace of mind for the contractor. EASIER: Wirelessly monitor force, speed and distance through the entire pull. The G-Series Smart Pull Eliminates. Diminished transmission capabilities. Rework and liability for the contractor. Potential fire hazards. FG can be powered by outer power supply (charge jack). DCVV, ma. Must use stable DC power supply. Center positive, outside negative. FG has polarity protection circuit. Power supply reverse polarity will not damage it. Note: If powerd by built-in lithium battery, the battery charge jack can only be input with a.