Jeol 2010f manual

collection on a JEOL F cryomicroscope. Mr. T. is designed to image the same feature-of-interest for m ultiple exposures over a user- directed range of tilt angles while minim izing dose on the. JEOL F Daily Operation Guide Last modified on Octo Note: This guide is NOT complete operation manual of JEOL F. It is only for your daily operation quick reference. Remember: 1. Please acknowledge NUANCE-EPIC facilities in your publication if you have TEM results taken with this microscope. 2. JEMF. FasTEM High Resolution Analytical Transmission Electron Microscope. Applications: XEDS, EELS, Imaging Filter, SAED, CBED, STEM, HAADF STEM, HREM, Diffraction Contrast Imaging. Accelerating Voltage: Up to kV (50 V steps) Filament: Zirconated tungsten () thermal field emission tip. Resolution.

JEOL F manual. They inconsistently refer to the second condenser lens as CL3, the third condenser lens, or CL2. This happened because the F manual is an expanded and modified manual, resulting in several inconsistencies. In this document, we will always refer to it as CL3, since that is the convention used by the JEOL service. 3) JEOL PC: TEMCON - Double click black StageNeutral button to neutralize sample position. 4) Make sure sample shifts and tilts are zero. 5) If you used double tilt holder, switch to holder selection option from double tilt holder "EM/" to single tilt holder. 6) Remove specimen holder from the microscope following the steps below. Depending on the needs, either the JEOL FX S/TEM or the JEOL F S/TEM can be considered for initial training. It is recommended, however, that new TEM users begin training on the JEOL FX. If interest exists and as the skill of the user develops and the requirement of the research demands more advanced analysis, training can be.

JEOL F manual. They inconsistently refer to the second condenser lens as CL3, the third condenser lens, or CL2. This happened because the F manual is an expanded and modified manual, resulting in several inconsistencies. In this document, we will always refer to it as CL3, since that is the convention used by the JEOL service engineers. JEOL F MANUAL Quick check list 1. Check the accelerating voltage, must be at kV (right screen), HT (µA) (left panel) at and Emission (left panel) at 2. Check the vacuum sequence (left drawer), V17, V13, V5B and V2 on. Vacuum measured on SIP (SIP unit, second vacuum meter from the top) must be better than 2 x Pa (blue. JEOL F Daily Operation Guide Last modified on Octo Note: This guide is NOT complete operation manual of JEOL F. It is only for your daily operation quick reference. Remember: 1. Please acknowledge NUANCE-EPIC facilities in your publication if you have TEM results taken with this microscope. 2.